No. 5100 Rail
Top mount. 16 gauge galvanized steel.  Mounting/flashing brackets welded to the rail on 2 foot centers.  No separate brackets or rail couplings needed.  For doors weighing up to 450 lbs. per panel.

No. 5103 Hi-Tensile Steel Rail
Top mount. 16 gauge galvanized steel.  For doors weighing up to 600 lbs. per panel when used with steel roller bearing hangers.

No. 5104 White Covered Rail
Top mount. 16 gauge galvanized steel.  One piece design features a durable, white pre-finished cover, permanently welded to rail--fast, simple installation without mounting brackets.  For doors weighing up to 450 lbs. per panel.

No. 5105 Rail
Top mount. 16 gauge galvanized steel.  For interior doors, and exterior doors that travel inside the building and for horse stall doors.  Mounting bracket welded to the rail on 2 ft centers.  Just nail the rail to the track board with ring-shank, neoprene washer nails.  No separate brackets or rail couplings required.  For doors weighing up to 450 lbs. per panel.  For use where flashing is not required.

No. 5110 Rail
Face mount. 16 gauge galvanized steel.  Welded-on mounting brackets on 2 ft. centers make rail installation fast and easy.  Rail is simply attached to building with lag screws.  No rail splicing brackets required, as end bracket of each piece of rail overlaps next length for perfect alignment and tight joint.  For doors weighing up to 450 lbs. per panel.

No 59. Covered Rail
Face mount. 16 gauge galvanized steel.  A face mounted rail with 18-gauge cover spot-welded on top of rail.  No brackets required as cover provides a  continuous bracket.  For doors weighing up to 450 lbs. per panel.

No. 5120 Flashing
For Easy-Mount* Rail Nos. 5100, 5103, & 5105
10' sections, white finish, 28 gauge steel.

(Use Flashing Bracket No. 5151)