Home
Loading Dock Seals
Truck Shelters
Strip Doors
Curtain Walls
Dock Levelers
Dock Bumper Page
Accessories
Dock Board
Sliding Door Hardware
ROTARYPRODUCTSINC.COM/YARD_RAMPS
Snow Hoods
Safety Signs Lights
INST_INS_MANUALS
PARTS_LISTS_DRAWINGS
FAQ
Wheel Risers
Pit Kits
Walk Ramps
Mesh Screen Curtain Doors
DOCK BUMPER GUSSETS
Molded_dock_bumpers
Extruded Bumpers
Extra Thick Dock Bumpers
Dealer Page State Locator
Impact Doors
Hydraulic/Automatic Vehicle Restraint
FASTENERS
Fixed Gate Info
Loading Dock Equipment
Dock Seal Map
Location
Not All Loading Docks Are Alike
Our Founding Father
Quality Assurance
Contact
Dock Seal 
  • Compression Dock Seals
  • Tapered Compression Seals
  • Super Z Compression Seals
  • Compression Seals with curtain headers

 

Compression Seals

Rotary Products has been manufacturing quality custom compression dock seals for over 20 years.  In our efforts to produce the finest compression dock seal available we have studied and monitored the performance of not only our own products, but those of our competitors.  These studies have resulted in an evolution of quality that is unsurpassed in our industry.

We know that special dock seal designs are needed to accommodate different slopes and sizes of trailers and that's what makes our dock seals outlast our competitors.  If you want the most clearance for forklift traffic and products, a tight seal for insulation and protection against fumes, dirt, dust, insects and other unwanted matter, you have come to the right place.

For Fabric comparison:  here

For our standard Compression Seal with a projection from 8" to 21" in (1") increments our dock seal is custom built to serve your needs. Click Here

  • Specially-designed ventilation holes and vent pockets provide fast air escape and recovery when units are compressed and decompressed by contact with trailer.
  • Special bonding of polyurethane foam to the frame make these seals durable, long-lasting performers.

All units are equipped with yellow safety guide stripes to aid drivers in proper alignment of their trailer with the loading dock seal.

Dock Seal Options

  • Belting Guards
  • Bumper seals
  • Wear shields
  • Snow Hoods
  • Fire Retardant material
  • Logo's
  • Weather Stripping
  • And More...
Tapered Compression Dock Seal
Tapered compression dock seals are designed to match the angle of your loading dock and form a tight seal with trailers backing up or down sloped drives. 
MC Header Dock Seal
Rotary's MC Header style dock seal is designed to seal extra high door openings of 10' or higher.  This efficient, practical design is used in many loading dock applications.  This header is compatible with any C-Series, Z-Series or Tapered dock seals.
Adjustable Curtain Dock Seal
The AC Header Dock Seal is recommended for applications requiring access to the top of trucks.  The simple rope and pulley arrangement with a split, roll up curtain is less expensive and more serviceable than counter balanced adjustable headers.  In some situations this dock seal design can be recommended for loading docks that are serviced by different heights of trailers.
18" Header Dock Seal

An 18" header pad design for your dock seal will allow a larger range of trailer heights to effectively complete their seal.  This design is a great application for places where there are only one or two docks available.

Z-Series Dock Seals
If your loading dock was built with 9' or 10' openings then our Super Wedge dock seal might be for you.  In some cases loading dock openings are built wider then the trailers that are used on them.  The Z-Series Super Wedge dock seal is desinged to project into these openings allowing the trailer to make an effective seal.
Dock Seals With Options
All Rotary's dock seals have many options available.  Please call the factory for more information.
Quality Dock Equipment At Affordable Prices



Rotary Products Inc.

202 East High St.

PO Box 370
Ashley Ohio, 43003
Phone: 800.457.5251 or (740) 747.2623

Email:  RPISEAL@AOL.COM