Loading Dock Equipment - Dock Levelers

Dock Levelers

Mechanical and Hydraulic Loading Dock Levelers for all loading dock applications.

C & P2 Mechanical Pit Leveler
55,000 lb minimum yield steel tread plate
Direct extension spring provides easy walk down, no moving parts!

HP Series Pit Leveler
Mechanical or Hydraulic, Durable Levelers from RPI are available in virtually
every length, width, and capacity configuration!

AIRDOCK Protected Single-Chamber Air Powered Pit Leveler
From 25,000 to 50,000 lb. capacity, 5 Year lift mechanism warranty, 10 Year structural warranty, 20 year full width rear hinge warranty. CALL for Quote.

EHP Pit Leveler
Rotary's new value priced EHP Series Hydraulic Dock leveler creates a cost effective path for your customers to migrate from mechanical to fully hydraulic pit levelers!

New HDH Heavy Duty Hydraulic Pit Leveler!

The HDH can handle those extra heavy loads that you or your customer may need to move across your dock - 50,000 up to 80,000 lb. Dynamic Capacities. CALL for a Quote.

Barlift Edge of Dock Leveler
Rotary's rugged Barlift Edge of Dock levelers are available in standard capacities up to 35,000 lbs., with options of 66", 72", 78" and 84" widths. All levelers are available with or without bump blocks. The BL utilizes an adjustable Torsion Spring.

Barlift Extension Springs (BLE) Edge of Dock Leveler
The Extension Springs version of the Barlift. Instead of Torsion Spring, the BLE utilizes 2 Extension Springs. CALL for Quote.

Hook Style Edge of Dock Leveler
Edge of Dock Levelers are affordable and reliable!

Hydraulic Edge of Dock Leveler

If you are ready for hydraulics, check out our hydraulic edge of dock loading dock levelers.

CAM LIFT Edge of Dock Leveler

Simply pull back the handle and the lip will mechanically lift over the truck height.

LO-DOCK Edge of Dock Leveler for Loading Docks Lower than Normal
Model LD Edge of Dock Levelers are designed for Low Height Loading Docks. Units that mount from 3" to 9" above your existing Dock Height are available. NO WELDING REQUIRED for installation. CALL for Quote.

Truck Restraints

Mechanical or Automatic, with Signs and Lights.

Hydraulic/Automatic Truck Restraint

The TL-85 Hydraulic Vehicle Restraint has overall body dimensions 13'W X 27"L X 11" H (220 X 686 X 279MM) plus back mounting plate, with interior/exterior communication lights and driver warning signs.

- TRAILER REAR IMPACT GUARD DURING BACKING DOES NOT IMPACT RESTRAINT BODY, - � HP TOTALLY ENCLOSED NON-VENTILATED (TENV) MOTOR IN REMOTE LOCATION ON 24' HYDRAULIC HOSE, - CONTROLLED FROM A NEMA 12 REMOTE PUSH-BUTTON CONTROL STATION WITH ON/OFF AND KEY CONTROL, - UNIT PROVIDES RESTRAINING STRENGTH 35,000LB AND MOUNTING FORCE OF 100,000LB, - NEMA4 SUBMERSIBLE RATED WAND SWITCH, REMOTE POWER PACK LOCATION AND CYLINDER VENTED TO POWER PACK RESERVOIR PROTECTS FROM WATER DAMAGE

Pit Forming Kits with Curb Angle
The Perma Pit has 3 steel sides that act as form and curb angle. Everything is there to form the pit to the right size, which eliminates costly mistakes. The Perma Pit bolts together with 6 bolts, which makes it quick and easy to set up, and saves time and money. The Perma Pit is not part of the leveler.