Curtain Wall Hardware 

The basis of the Rotary Custom Curtain Wall System is its unique hardware system.  There are three basic elements to the system, and a wide variety of different methods of mounting these basic elements.  The basic elements include:

  1. Straight and curved track sections.
  2. Track splices or track joiners
  3. Track trolleys that hold the curtain material and move inside the track. 

Another basic piece of the hardware system is the end stop.  The end stops are installed in the track to stop the trolleys from traveling out the end of the track or to stop the trolley at the designated point.

THE TRUE VERSATILITY OF THE CUSTOM CURTAIN WALL SYSTEMS ARE THE MANY WAYS THE HARDWARE CAN BE MOUNTED OR SUSPENDED.....

Trolley systems are available with either nylon wheels or steel ball bearing wheels.  The nylon wheels are designed for systems that use light curtain materials, the steel ball bearing wheels are the better system for heavier curtains.  The wheel design allows the curtain to roll easily and close fully.  The trolleys are available in a variety of designs with different wheel configurations, curtain hanger hooks, with or without bumper protectors, designs that allow a curtain to overlap and trolleys to be pulled by a rope to prevent damage to the curtain material in certain applications.

Wall Mounting Hardware

Wall mounting hardware is used to mount track systems to adjacent walls, or where the track ends into a wall.  The mounting brackets are either above or below the mount for choice of mounting close to ceiling or closer to door height.  There are brackets, splices and end mounts.

Ceiling Supported Hardware

Ceiling supports are designed to have the entire custom curtain wall system attached to the ceiling in offices and other low ceiling areas.  The hardware is designed so that track can be attached before or after the hardware is attached to the ceiling.  There are no screws or nuts protruding above the mounting plates.  No spacers or clearance holes are needed to work with the hardware.  The  mounting plates have stud ends that are used to lock the track to the support hardware.  There are curved track, splices, brackets, right angle and three-way intersection brackets all with the ceiling support plates.

Floor Support Hardware

This hardware is designed to allow you to support parts of or the entire curtain wall system from the floor.  The support columns are 1 1/4" spuare, 12 gauge steel tubes that are in 6', 7', 8', 9', 10' lengths.  Base plates for the support tubes are 12" squares that are made from 1/4" thick steel plates.  There are floor support curved track, splices, brackets, right angle and three-way brackets, splice/floor and corner brackets.

The beam flange support hardware is designed to allow attachment to edges of roof trusses, beams or channels with edge clamps and set screws.  The edge clamps can be rotated for alignment to the support structure.  Brackets, splices, right angle and three-way brackets are available with the beam flange clamp system.
The threaded rod support hardware is designed for use when there are no easily accessible structures near the area you want to hang the track.  The rod can be mounted to any structure near the ceiling and significantly above the track system.  The rods are available in 10' long sections and can be joined together with coupling nuts.  Edge clamps like those used in the flange clamp system can be used to clamp rods to ceiling beams, trusses, etc.  Splices, brackets, right angle and three-way brackets are available.

Double Track Hardware

Support hardware for double track systems
are available in all of the different styles
listed on this page.  Contact the factory if
you need support hardware for double tracks.

Track Support Hardware Systems
Can be A Mixture Of Styles To Meet
The Needs Of Your Particular Design.
Home | Products | Location | Quality Assurance | Contact |
Quality Dock Equipment At Affordable Prices



Rotary Products Inc.
202 East High St.
PO Box 370
Ashley Ohio, 43003
Phone: 800.457.5251 or (740) 747.2623

Email:  RPISEAL@AOL.COM